Filter
Top Products
Selecting Channel and Mode
4.
5.
6.
7.
8.
If you want to change the channel, press or . If you
do not, press Then you move to a submenu, MODE. The
current setting for HP emulation mode is shown on the display:
Press to enter the MODE option. The icon appears to
the left of the currently set printer mode as shown below.
You can choose either the L-JET2P, LQ, or FX mode. Press
either or until the mode you want to select appears
on the display.
Press to set the new mode. The display returns to the
main menu.
Press the
SelecType
button to exit SelecType.
This mode setting remains in effect until you change the setting
again or turn off the printer. If you want this setting to remain in
effect even after you turn the printer off and back on, use the
P-CONFIG option to save the setting as described later in this
chapter.
3-14 SelecType