Filter
Top Products
Status and Error Messages
[S]
[E]
[E]
[E]
[S]
[S]
READY
The printer is ready to print.
REINSERT CARD
If this message appears on the display, you may have removed
a font card or cartridge while the FEED light was still lit or
while the printer was on line. To correct the error, make sure
the printer is off line. Next, reinsert the card or cartridge into
the correct slot and press CONTINUE.
REMOVE CARD
You may have inserted a font card or cartridge while the
printer was on line or while the FEED light was on. Data still
remains in the printer’s buffer. To correct this error, take the
printer off line. Then remove the card or cartridge and press
CONTINUE. Before you reinsert the card or cartridge, make sure
that all data in the buffer has been printed and that the
printer is off line. If the FEED light is on, press FEED to print
out the remaining data.
RESELECT TRAY
The optional lower paper cassette is not installed and the
INPUT option is set to OPT or AUTO. Install the optional
lower paper cassette and then press CONTINUE. If you decide
not to use the optional lower paper cassette, simply press
CONTINUE and paper is automatically selected from the
standard paper cassette.
RESET
The printer is being reset to the previous settings in the macro
specified with LOAD MACRO option in SelecType Level 1.
ROM Check
The printer is checking ROM.
7-6 Troubleshooting