Filter
Top Products
The Control Panel
messages. If the CONTINUE light is flashing, read
the corresponding error or status message on the
display and correct the problem as described in
Chapter 7.
SelecType
COPY END — Cancels the remaining copies during
multiple-copy printing. This button is effective
only when the printer is off line.
RESET — Cancels some settings made with
SelecType or software commands. When you hold
down this button for several seconds, ‘RESET
appears on the display and all settings return to
their previously saved values. The page being
printed when this button is pressed is finished.
However, all remaining data is discarded. If you
press
or
, the printer returns to its
previous status without printing data.
If you continue to hold down this button after
RESET appears, INITIALIZE appears on the
display and the printer settings return to the
power-on default settings.
Enters or exits SelecType mode. Press once to
enter Level 1; hold down to enter Level 2. When
you enter each level, the corresponding indicator
light goes on. For a complete description of
SelecType, see Chapter 3.
Other control panel features
Data dump
Hold down the SelecType button while you turn on
printer to turn on data dump (or hex dump)
mode. This feature allows advanced users to find
the cause of communication problems between the
computer and the printer. See Chapter 7.
Testing and Connecting Your Printer
2-5