Filter
Top Products
Testing the Printer
6.
Pull the paper set lever back to the automatic position.
Note: The paper set lever must be in the automatic position
before paper can be fed automatically from the paper cassette. If
you set the lever to the manual position when the printer is on,
automatic paper feeding is disabled and the PAPER OUT
message appears on the display, even if there is paper in the
paper cassette.
Now you’re ready to turn on the printer and run a test print.
Turning on the printer
Make sure the printer is plugged in and the imaging cartridge is
installed; then turn on the power by pressing the vertical bar
on the power switch located at the back of the printer. All of the
lights on the control panel light briefly at power on.
Testing and Connecting Your
Printer
2-9