Filter
Top Products
Using the SUB CONFIG Option
1 to available
Use this option to set the page length. The unit of measure for this
option is 1/6th of an inch. If you change the ORIENT, P-SIZE, or
FORM TOP settings with SelecType, the form length setting
automatically returns to the default setting for each paper size. The
factory setting is 62 (line spacing 6 lines per inch).
* OFF
ON
When SKIPBOTTOM is set to ON, the printer inserts the number
of line spaces specified by the ESC N (skip over perforation)
command between the last line printed on one page and the first
printable line on the next page. The total number of lines skipped
equals the FORM TOP setting plus the amount of skip over
perforation set with ESC N. Since most application programs insert
their own top and bottom margins, you should use this feature
only if your program does not provide them.
* PcUSA
PcMult
PcPort
PcCanF
PcNord
DLoad
ITALIC
3-44
SelecType