Filter
Top Products
The Font Cartridges
Supplier
lntercon
Cartridge number Cartridge
PHONT+
PRO II P
CAUTION: Use only the HP font cartridges listed above
in your EPL-7000. You cannot use other HP font
cartridges with this printer, or you may damage your
printer.
You can use each font cartridge in only HP emulation mode. See
the font card manual for information on the printer mode to use.
To change the printer mode, use the SelecType Level 2 CH
CONFIG option described in Chapter 3.
Inserting a font cartridge
Optional font cards are easy to use with your printer. You can
insert a font cartridge into the slots at the left back of the printer.
Follow these steps to insert a font cartridge:
CAUTIONS:
Never insert or remove a cartridge while the printer is
on line, in SelecType mode, or while the printer is
resetting (after you press RESET).
l Be careful when you insert or remove a font
cartridge. You can damage the cartridge by trying to
insert it the wrong way or by using too much force.
l Do not touch the connector on the bottom of the
cartridge or the connector in the printer’s cartridge
slots. You could damage the cartridge or printer.
1.
If the CH P or CH S light is flashing, press FEED to print any
data remaining in the buffer.
2.
Take the printer off line or turn off the power.
A-4 Appendix A