Filter
Top Products
Paper Handling
Problem
Solution
The paper feeds but
then jams at the
paper eject area.
Printed pages curl
too much and are
not placed in the
output tray
properly.
The printer prints a
page and then stops.
The display reads
PAPER SIZE ERROR
and the red
CONTINUE light
flashes.
There may be too much paper in the
output tray. Never let more than 250
sheets accumulate in the face-down output
tray on top of the printer. If you install
the optional face-up output tray, never let
more than 150 sheets accumulate in the
face-up tray.
Your paper may be moist or damp.
Printing is sensitive to moisture absorbed
by the paper. Do not store your paper in a
humid or damp environment.
You may not be using the correct type of
paper for your printer. Smooth, high-
quality copier paper is recommended for
best results. See Chapter 4 for more on
choosing paper.
Most paper has a natural curl that may be
emphasized when the paper is run through
a laser printer. Turn the stack of paper
over in your paper cassette and try
printing again.
Use the optional face-up output tray. The
face-up tray provides a straight-through
paper path to prevent excessive curling.
You may be trying to use a paper size that
is not listed on the P-SIZE menu in
SelecType. You may be able to feed this
paper manually as described in Chapter 4.
Use only paper sizes that are within the
specified range listed in Chapter 8.
Troubleshooting
7-33