Filter
Top Products
SelecType Overview
SelecType Level 2 functions
TEST PRINT
CH CONFIG.
MEMORY SHARE
CH TIMEOUT
AUTO CONT.
BEEPER
P-CONFIG. SAVE
FACTORY RESET
VERSION
STANDBY
3-4
SelecType
Prints two test patterns to check printer
operation.
Channel configuration. Sets up the operating
mode, interface configuration, and the size of
the printer’s input buffer for each channel.
Memory share. Specifies the proportion of the
printer’s memory shared between channel S
and P.
Channel time out. If no data is sent during the
specified time period, the printer switches from
one channel to the other.
Automatic continue. Permits the printer to
continue printing instead of stopping under
certain error conditions.
Turns the beeper on or off.
Printer configuration save. Saves all Level 2
settings as defaults so they take effect each
time you turn the printer on.
Returns all Level 1 and Level 2 settings to their
factory settings.
Displays the version numbers of the printer’s
firmware components such as the controller and
font.
Conserves power by reducing power to the
fixing heater when the printer is not used for
30 minutes.