Filter
Top Products
SelecType Options
ON
OFF
When this option is set to OFF, the AUTOFEED signal on pin 14
is ignored and the printer does not send an automatic line feed
(LF) command with each carriage return (CR). When AUTOFEED
is set to ON, a line feed is added to each carriage return the
printer receives. If your text lines overprint each other, you may
need to set AUTOFEED to ON.
-5
0
+5
This option sets the delay period from the ACKNLG to the BUSY
signal. Available settings are
0, -5,
and
+5
microseconds. For
most applications, leave this option set to 0 microseconds. The
factory setting is
0.
Before you can set options on the SERIAL submenus, you must
choose either RS-232C or RS-422 to match your interface
communication.
RS232C
RS422
SelecType
3 -27