Filter
Top Products
SelecType Options
Print two different test patterns to check whether your printer is
working correctly. After TEST PRINT appears, press once to
see the following display.
Press to print Pattern 1 (vertical lines) or press to
display Pattern 2 (horizontal lines); then press to print
Pattern
2.
The channel configuration option allows you to choose settings for
the MODE (operating mode), I/F (interface configuration), and
RX-BUFFER (
size
of receive buffer) for each channel. You select
the channel you are going to use. After CH CONFIG appears,
press to see the following display:
* P or S
Press to select Channel I’. If you share the printer and want
to select Channel S, press to display option S; then press
to select channel S. Once you select a channel, you enter the
submenus of CH CONFIG option:
MODE
i/F
RX-BUFFER
SelecType
3-25