Filter
Top Products
Using Your Printer with Application Software
HP LaserJet series IIP emulation mode
If you have not changed the factory setting, your printer is in HP
emulation mode. Simply
use
your application program’s setup
menu to choose the first printer available from the list of printers
below. They are listed in order of preference. (For more about HP
emulation, see Appendix C.)
HP LaserJet series IIP™
HP LaserJet series II™
HP LaserJet Plus™
HP LaserJet 500™
HP LaserJet™
If none of these printers are listed among your program’s options,
select any printer that uses the HP Printer Command Language
(PCL).
Epson LQ and FX emulation modes
Make sure you have set the SelecType Level 2 MODE option to
LQ or FX as described in Chapter 3. Then, use your application
program’s setup menu to select a corresponding printer driver from
the list below. They are listed in order of preference.
LQ Mode
FX Mode
SQ-2500
FX-1000/800 (286e/86e)
LQ-2500
FX-85
LQ-1050/850
FX-80
LQ-1000/800 (expanded ESC/P)
LQ-500
LQ-1500 (with version 2 ROM)
LQ printer
If none of the printers listed above are available from your
program, choose the first available of the following: EX, JX, LX,
RX, MX, Epson printer, Standard printer, or Draft printer.
Application Software 5-3