Filter
Top Products
Problems with Graphics
Problem
Solution
The message
The full print buffer or the receive buffer
INSUFF. MEMORY
setting needs to be changed. To correct this’
appears and
error, change the FULL PRINT or
graphics cannot be
RX-BUFFER setting in SelecType Level 1
printed.
as described in Chapter 3.
Your printer may not have enough
memory installed. You need to simplify
the page or install additional memory.
Press the CONTINUE button to clear the
error. For information on memory options,
see Appendix A.
The printer does not have sufficient
memory available for the task you have
given it. It may be necessary to simplify
the page you are trying to print or add
more memory to the printer. Press
CONTINUE or RESET to clear the error. See
Appendix A for information on memory
options.
Troubleshooting
7-27