Filter
Top Products
SelecType Options
L-JET2P
LQ
FX
This option selects one of three operating modes that the printer
can use. You can set a different mode for each channel. See
Selecting Channel and Mode earlier in this chapter for more
information.
PARALLEL
SERIAL
This option selects the printer interface. The settings are parallel
for Channel P and serial for Channel S. The PARALLEL option has
these three submenus:
SLCTIN
AUTOFEED
BUSY DELAY
ON
OFF
With SLCTIN set to OFF, the printer is continuously selected and
device control codes DC1 and DC 3 are ignored. In almost all
cases, leave SLCTIN set to OFF. When SLCTIN is ON, the
SLCTIN signal goes HIGH at power-on and the control codes DC1
and DC3 are valid.
3-26
SelecType