Filter
Top Products
Welcome 11
Unpacking the Projector
After unpacking the projector, make sure you have all the parts
shown below:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case (either an Epson case or something similar,
such as a well-padded case). See page 12 for ordering information, and
page 95 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-Video signal, you’ll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 12.
■ To receive a component video signal from a VCR or other video
device, you’ll need a component-to-VGA video cable. One may
be provided with your video equipment, or you can purchase one
from Epson; see page 12.
Projector Remote control and
batteries
Projector software
CD-ROM
Power cable VGA computer cable Cable cover