Filter
Top Products
6
89
6
Maintaining the Projector
Your projector needs little maintenance. All you have to do on a
regular basis is keep the lens cover glass clean. Any dirt or smears on
the lens cover glass may show up on your projected image.
You also need to periodically clean the air filter at the side of the
projector. A clogged air filter can block ventilation needed to cool the
projector.
The only parts you should replace are the lamp and air filter. If any
other part needs replacing, contact your dealer or a qualified servicer.
This chapter covers the following:
■ Cleaning the lens cover glass
■ Cleaning the projector case
■ Cleaning the air filter
■ Replacing the air filter
■ Replacing the lamp
■ Transporting the projector
warning
Before you clean any part of
the projector, turn it off and
unplug the power cord.
Never open any cover on the
projector, except the lamp
cover. Dangerous electrical
voltages in the projector can
injure you severely. Do not
try to service this product
yourself, except as specifically
explained in this User’s
Guide. Refer all other
servicing to qualified service
personnel.