Filter
Top Products
Managing the Projector from a Remote Computer 75
Connecting and Configuring the
Projector
Before using the Easy Management software to manage your
projector(s), you have to connect each projector you want to monitor
to your network and configure it with an IP address.
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable.
Connect the cable to the
LAN port on the projector as shown:
2. Turn on the projector (see page 28).
3. Press the
Menu button on the remote control, select Wired LAN
from the Network menu, then press Enter.