Configuring the Projector 63
Viewing Lamp Usage and Other
Information
Use the Info menu to view information about the display settings of
your computer and video devices and the number of hours the lamp
and filter have been used.
1. Press the
Menu button on the remote control, highlight Info,
then press the
Enter button to select the Settings menu.
You see one of the following menus:
■ Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp ranges from about 2500 hours in High
brightness mode to about 3000 in Low brightness mode. If
the number shown is close to 2500 or the information is
displayed in red, make sure you have a spare lamp handy.
Computer (analog RGB, RGB video, and component video)
Video (composite and S-Video)
note
The lamp usage timer
doesn’t register until you’ve
used the lamp for at least
10 hours.