Filter
Top Products
Setting Up the Projector 19
Connecting a Component Video Source
1. Locate a component-to-VGA video cable (you can purchase one
from Epson; see page 12).
2. Connect the RCA end of the cable to your player and the VGA
end to the
Computer1 port on the projector.
3. If you want to play sound through the projector, see page 25 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image.
5. Once the projector is turned on, enter the projector’s Signal menu
and make sure Computer1 is set to
Auto; see page 54.