Filter
Top Products
62 Configuring the Projector
■ SNMP
Trap IP Address 1:
Lets you register an SNMP trap
notification destination.
Trap IP Address 2: Lets you register a second SNMP trap
notification destination to be used if the projector cannot
access the IP address registered in Trap IP Address 1.
Community Name: Lets you assign a community name for
SNMP. You can register up to eight numbers and letters.
■ Mail
Mail Notification:
Turn this setting on to have the projector
send you an e-mail when it detects a problem.
SMTP Server: Lets you define your SMTP server address
information to the projector.
Port Number: Lets you define your SMTP server’s port
number to the projector.
Address 1 Setting: Lets you register an e-mail address where
you can be notified when the projector detects a problem.
Address 2 Setting: Lets you register a second notification
e-mail address.
Address 3 Setting: Lets you register a third notification
e-mail address.
■ Projector Name
Lets you assign a unique name to the projector to identify it
on the network.
3. When you are finished, press the
Esc or Menu button.