Filter
Top Products
Configuring the Projector 57
■ Pointer Shape
Lets you select from three different pointer shapes. The
Password Protect function must be cancelled first. See
page 69.
■ Brightness Control
Allows you to select Low lamp brightness when the
projection is too bright for the room. The Low setting also
reduces electricity consumption and fan noise. Select
High
to project at the maximum brightness. (Also check the
Brightness setting in the Image menu; see page 53.)
■ Volume
Adjusts the volume for the projector’s speaker.
■ RCA Audio Input
Lets you change the L-Audio-R audio port as the input for
the Video port or S-Video port. Select
Video to use the RCA
port for the Video port. Select
S-Video to use the RCA port
for the S-Video port.
■ Remote Receiver
Select Off to disable the remote control receivers on the
projector to prevent interference from fluorescent lighting or
other sources. Or enable specific receivers using the following
settings:
Front/Rear, Front, or Rear.
■ Test Pattern
Allows you to adjust the projector without a video source.
While the test pattern is displayed, you can make Zoom,
Focus, and Keystone adjustments.
3. When you’re finished, press
Esc or Menu.