Filter
Top Products
Configuring the Projector 61
Selecting Network Settings
Use the Network menu to configure the projector’s network settings
and set it up for network use.
1. Press the
Menu button on the remote control, highlight
Network, then press the Enter button to select the Settings
menu.
2. Use the pointer button to highlight menu items, then press
the
Enter button to select from any of the following options:
■ Wired LAN
DHCP:
Lets you turn DHCP On or Off.
IP Address: Lets you assign an IP address to the projector.
Subnet Mask: Lets you assign a subnet mask to the
projector.
Gateway Address: Lets you assign a gateway address to
the projector.
MAC Address: Lets you view the projector’s MAC address.
■ PJLink Password
Lets you assign a password to be used when accessing the
projector with PJLink software.
■ Web Control Password
Lets you assign a password to be used when accessing the
projector using Web Control.