Filter
Top Products
80 Managing the Projector from a Remote Computer
The following table explains the meaning of the Group status icons:
The following table explains the meaning of the Type status icons:
Group status icons
No warnings or problems. All projectors in the group
are operating normally.
Warning or problem. A projector in the group has a
warning or problem.
Monitoring disabled. Right click the icon and select
Monitoring Enabled to begin monitoring the group.
Data is currently being updated.
Type status icons
No warnings or problems.
Warning or problem.
Monitor Password error. No monitor password was
entered when the projector was registered, or an
incorrect password was entered.
Monitoring disabled. Right-click the icon and select
Monitoring Enabled to begin monitoring the
projector.
Data is currently being updated.
Network error (for example, the projector is not
connected to the network, or power cable is
disconnected).
You may also see this error if Network Off is
selected in Standby Mode (see page 59).
Network error (Esc/VP.net communication error).
note
To create projector groups in
EMP Monitor, refer to the
on-screen Operation
Guide.