Filter
Top Products
100 Printing and Scanning Without a Computer
Removing the Film Holder and Document Mat
1. Open the scanner lid and slide out the document mat. Set the mat aside so
you can reinstall it for scanning reflective documents later.
Note:
You can’t scan film or slides unless the white document mat is removed from the
scanner lid.
2. Remove the film holder from its storage place. (Remember to replace the film
holder when you’re done using it.)
3. Place your film or slides in the film holder:
■ See page 101 for film
■ See page 102 for slides
SP RX600 Users Guide.book Page 100 Thursday, January 29, 2004 1:08 PM