Filter
Top Products
Scanning Film or Slides to a Memory Card 99
3. Make sure the memory card light (next to the card slots) is off and that no
cards are inserted. Then insert a card into the correct slot, as shown.
The memory card light turns green.
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the LCD screen to format the card. Any data stored on the
card will be erased.
CompactFlash or
Microdrive (bottom)
MemoryStick (middle)
SD or MMC (middle)
SmartMedia (top)
xD (top)
Memory
card light
SP RX600 Users Guide.book Page 99 Thursday, January 29, 2004 1:08 PM