Filter
Top Products
Copying Without a Computer 23
9. Press the sides of the left edge guide together and slide it against the paper
(but not too tightly).
Note:
Do not place the paper in front of the feeder guard.
10. Flip the feeder guard back over the paper.
11. Press the
Copy button to set the RX600 to Copy mode.
12. Make sure you see
Standard Copy at the top of the LCD screen. This prints
a photo or document with borders. If you want to select a different setting,
such as a photo with no borders, press the
Menu button, then see “Changing
the Copy Layout” on page 26.
SP RX600 Users Guide.book Page 23 Thursday, January 29, 2004 1:08 PM