Filter
Top Products
102 Printing and Scanning Without a Computer
Placing 35 mm Slides on the Film Holder
1. Position the film holder so that the 35 mm slide section faces the center of the
scanner glass. The positioning posts fit in two small holes near the scanner lid,
as shown.
2. Places slides in the film holder as shown, with the duller (emulsion) side face
up.
3 Close the scanner lid.
4. Press the
Film Print button to set the RX600 to Film Print mode.
5. Use the u and d buttons to choose
Scan to Memory Card, then press the
OK button.
SP RX600 Users Guide.book Page 102 Thursday, January 29, 2004 1:08 PM