Filter
Top Products
Restoring Color From Faded Photos 67
Restoring Color From Faded Photos
You can bring your old photos back to life when you scan them with Epson Scan.
Your Stylus Photo RX600 and Epson Scan let you bring back the color from your
faded photos so that your scanned images look brand new.
1. Open the scanner lid.
2. Place your photo face down on the glass in the upper left corner about
0.1 inch from the edges, as shown.
You can also place additional photos and scan them at the same time.
3. Close the scanner lid.
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
To scan a thick document, you can remove the scanner lid. Turn
off the Stylus Photo RX600, and open the scanner lid completely.
Then disconnect the cord from the TPU connector and pull the lid
straight up. Turn on the Stylus Photo RX600 and gently press
down the original to keep it flat on the scanner glass as you scan.
When you’re finished, be sure to turn off the Stylus Photo RX600
before replacing the scanner lid and plugging in the connector.
0.1 in
0.1 in
Move the document
in about 0.1 inch
from the edges
SP RX600 Users Guide.book Page 67 Thursday, January 29, 2004 1:08 PM