Filter
Top Products
S1F76640 Series
2–46 EPSON S1F70000 Series
Technical Manual
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
Parameter Symbol
Rating
Unit Remarks
Min. Max.
Input supply voltage
VDD GND-0.3 24/N V VDD
N = 2 : 2 times step-up
N = 3 : 3 times step-up
N = 4 : 4 times step-up
Input pin voltage VI GND–0.3 VDD-0.3 V OSC1,POFF
GND–0.3 VO-0.3 V TC1,TC2, RV
Output voltage VO GND–0.3 22 V VO Note 3
GND–0.3 VO VVREG Note 3
Output pin voltage 1
VOC1 GND–0.3 VDD–0.3 V CAP1+,CAP2+ OSC2
Output pin voltage 2
VOC2 GND–0.3 2 × VDD–0.3 V CAP1–
Output pin voltage 3
VOC3 GND–0.3 3 × VDD–0.3 V CAP2–
Output pin voltage 4
VOC4 GND–0.3 4 × VDD–0.3 V CAP3–
Allowable loss PD — 210 mW SSOP-16PIN
Operating temperature
Topr –40 85 ˚C —
Storage temperature
Tstg –55 150 ˚C —
Soldering Tsol — 260 ⋅ 10 ˚C ⋅ s At leads
temperature and time
Note 1 : Under the conditions exceeding the above absolute maximum ratings, the IC may result in a permanent
destruction. An operation for a long period under the conditions of the above absolute maximum ratings
may deteriorate the reliability remarkably.
Note 2 : All voltage values are based on GND.
Note 3 : The output pins (V
O and VREG) are for stabilizing and outputting boosted voltages. So, they are not
used to apply voltage from outside. When voltage is applied from outside for unavoidable reasons, limit
the voltage to the rated voltage mentioned above or less.