Filter
Top Products
Krautkramer USN 52R/USN 52L Issue 05, 02/00 10-5
Function Description
LANGUAGE (center) Selection of the instrument dialog language
LENGTH (center) Determination of the byte length for data transfer via the RS232 interface
LOCATION (left) Selection of location in the active set
MEASURE (right) Selection of the correct measurement mode according to the type of probe used
MEAS. UNITS (center) Sets unit of measure for display and evaluation
MEMO (right) Switching on of the MEMO function and entry of additional information
MTL VEL (BASIC) Adjustment of the sound velocity in the meterial
O-DIAM (center) Adjustment of the outside diameter with curved surfaces
PARITY (center) Parity check for data transfer via the RS232 interface
PRINTER SELECT (center) Selects printer driver
PULSER (PULS) Change of operating mode
RANGE (BASIC) Sets range to be displayed
RECALL (MEM) Loading of a data set selected with DATA SET
RECTIF. (RCVR) Selection of signal display mode
Function directory
Appendix
Krautkramer USN 52R/USN 52L Issue 05, 02/00 10-5
Function Description
LANGUAGE (center) Selection of the instrument dialog language
LENGTH (center) Determination of the byte length for data transfer via the RS232 interface
LOCATION (left) Selection of location in the active set
MEASURE (right) Selection of the correct measurement mode according to the type of probe used
MEAS. UNITS (center) Sets unit of measure for display and evaluation
MEMO (right) Switching on of the MEMO function and entry of additional information
MTL VEL (BASIC) Adjustment of the sound velocity in the meterial
O-DIAM (center) Adjustment of the outside diameter with curved surfaces
PARITY (center) Parity check for data transfer via the RS232 interface
PRINTER SELECT (center) Selects printer driver
PULSER (PULS) Change of operating mode
RANGE (BASIC) Sets range to be displayed
RECALL (MEM) Loading of a data set selected with DATA SET
RECTIF. (RCVR) Selection of signal display mode
Function directory
Appendix