Filter
Top Products
5-50 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
5.10 Data set names
Data set names
You can give the instrument settings (data sets) alpha-
numeric names which are also stored. In doing this you
are able to identify your data.
The data set number remains the clear identification
(e.g. with the application of data transfer software).
The names can consist of up to a maximum of 8 char-
acters.
MEMO function
The MEMO function of the instrument gives further
possibilities for a better documentation of test results
(data sets). You can either type and store a text (max.
80 alphanumeric characters) for each data set, or you
can fill in data in predefined fields which are likewise
stored together with the data set. Unlike the text that
can be freely edited, a data header is structured and
consists of individual fields which are automatically or
manually filled in with additional information. You can
determine the structure of the header (number of fields,
field lenghts and field names) by means of remote con-
trol commands. You can define so-called active fields
which are automatically filled in with data (e.g. sound
path or amplitude) from the currently active A-scan.
When the MEMO function is switched on, the menu for
the entry of additional data (texts or header data) ap-
pears each time a data set is stored. This menu is al-
ways also accessible via the second operating level.
To use the MEMO function, you have to:
– switch the MEMO function on,
– define a header by means of remote control
commands if necessary.
H Note:
You will find the remote control commands in
chapter 8.7.
Operation Data set names
5-50 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
5.10 Data set names
Data set names
You can give the instrument settings (data sets) alpha-
numeric names which are also stored. In doing this you
are able to identify your data.
The data set number remains the clear identification
(e.g. with the application of data transfer software).
The names can consist of up to a maximum of 8 char-
acters.
MEMO function
The MEMO function of the instrument gives further
possibilities for a better documentation of test results
(data sets). You can either type and store a text (max.
80 alphanumeric characters) for each data set, or you
can fill in data in predefined fields which are likewise
stored together with the data set. Unlike the text that
can be freely edited, a data header is structured and
consists of individual fields which are automatically or
manually filled in with additional information. You can
determine the structure of the header (number of fields,
field lenghts and field names) by means of remote con-
trol commands. You can define so-called active fields
which are automatically filled in with data (e.g. sound
path or amplitude) from the currently active A-scan.
When the MEMO function is switched on, the menu for
the entry of additional data (texts or header data) ap-
pears each time a data set is stored. This menu is al-
ways also accessible via the second operating level.
To use the MEMO function, you have to:
– switch the MEMO function on,
– define a header by means of remote control
commands if necessary.
H Note:
You will find the remote control commands in
chapter 8.7.
Operation Data set names