Filter
Top Products
5-16 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
Clearing all data
You can clear all data sets (data logger and active in-
strument settings).
Operation:
– Switch off the instrument.
– Keep keys F , E and K simultaneously for
approximately 10 seconds.
All data sets are now cleared.
Displaying stored A-Scans (preview)
In the function group MEM you have the possibility to
display all A-Scans belonging to the stored data sets
without having to load them simultaneously. In this way,
you obtain a quick overlook of your stored data.
Operation:
– Simultaneously press N and O in the function
SET#.
The selected data set’s A-Scan is displayed. At the
same time, the function GAIN is changed in DATA SET
PREVIEW as recognition of this preview function.
If additional information was stored for this data set by
means of the MEMO function, the first 46 characters of
this additional information are displayed in the menu bar
(please refer to chapter 5.10).
– You can scroll through all stored data sets
using M. The corresponding A-Scans are
displayed.
– If you require to load a displayed data set, set the
RECALL function to ON using M and acknowledge
system safety prompt with F. The preview function
will then be switched off.
– If you do not wish to load a data set: exit the preview
function by pressing N and O simultaneously in
SET#.
Operation Adjustment of the USN 52R/USN 52L
5-16 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
Clearing all data
You can clear all data sets (data logger and active in-
strument settings).
Operation:
– Switch off the instrument.
– Keep keys F , E and K simultaneously for
approximately 10 seconds.
All data sets are now cleared.
Displaying stored A-Scans (preview)
In the function group MEM you have the possibility to
display all A-Scans belonging to the stored data sets
without having to load them simultaneously. In this way,
you obtain a quick overlook of your stored data.
Operation:
– Simultaneously press N and O in the function
SET#.
The selected data set’s A-Scan is displayed. At the
same time, the function GAIN is changed in DATA SET
PREVIEW as recognition of this preview function.
If additional information was stored for this data set by
means of the MEMO function, the first 46 characters of
this additional information are displayed in the menu bar
(please refer to chapter 5.10).
– You can scroll through all stored data sets
using M. The corresponding A-Scans are
displayed.
– If you require to load a displayed data set, set the
RECALL function to ON using M and acknowledge
system safety prompt with F. The preview function
will then be switched off.
– If you do not wish to load a data set: exit the preview
function by pressing N and O simultaneously in
SET#.
Operation Adjustment of the USN 52R/USN 52L