Epson USN 52L Printer User Manual


 
5-8 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
Setting the pulser
In the function group PULS you can change the operat-
ing mode and the pulse repetition rate of the pulser as
well as operate the reject function.
Use JC to go to the function group PULS.
PULSER Changeover of initial pulse
You can use this function to change between the single-
element or dual (T/R) mode for the instrument opera-
tion:
SINGLE: single-element operation mode; the probe
connector sockets are connected in parallel.
DUAL: dual (T/R) operation mode; the initial pulse is
available at the green socket - the red socket is
connected to the amplifier input.
Select this setting if you are using a dual (T/R) probe
or the through-transmission mode.
Operation:
Select the required setting in PULSER using M.
H Note:
The corresponding symbol will be displayed in the sta-
tus line:
Single Dual
Operation Adjustment of the USN 52R/USN 52L
5-8 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
Setting the pulser
In the function group PULS you can change the operat-
ing mode and the pulse repetition rate of the pulser as
well as operate the reject function.
Use JC to go to the function group PULS.
PULSER Changeover of initial pulse
You can use this function to change between the single-
element or dual (T/R) mode for the instrument opera-
tion:
SINGLE: single-element operation mode; the probe
connector sockets are connected in parallel.
DUAL: dual (T/R) operation mode; the initial pulse is
available at the green socket - the red socket is
connected to the amplifier input.
Select this setting if you are using a dual (T/R) probe
or the through-transmission mode.
Operation:
Select the required setting in PULSER using M.
H Note:
The corresponding symbol will be displayed in the sta-
tus line:
Single Dual
Operation Adjustment of the USN 52R/USN 52L