Filter
Top Products
Setting Options Description
Distinctive Ring All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single
or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
Triple
product can receive faxes on the correct number of
Double&Triple rings. Select All for phones lines that do not use this
service.
Rings to Answer 1 to 9 Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to answer a call.
Remote Receive Off Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
On
is set to Auto). When you select On, you must also
Start Code set a Start Code. If you are using a cordless handset
with its base connected to the product, you can start
receiving the fax by entering the code using the
handset.
Parent topic: Selecting Advanced Fax Settings
Output Settings - Fax
Set the output options you want to use for incoming faxes.
Note: If you select Save to Inbox, faxes are saved in the product's memory. Delete faxes after viewing
or printing them to prevent the memory from filling up. Even if you select other options for saving faxes,
they may be saved temporarily in the product's memory.
222