Filter
Top Products
Three
Using Your LifeBook C Series
LifeBook C Series from Fujitsu
43
POINT
When error messages occur see
Section Five, pages 80-82, for help
in understanding the meaning and
required actions to be taken.
BIOS SETUP UTILITY
The BIOS setup utility is a program that sets
the operating environment for your notebook.
It is referred to in this publication as the setup
utility. Normally, there is no need to change the
environment, it is set at the factory for normal
operating conditions.
The setup utility configures:
■
Standard system parameters, such as date
and time.
■
Device control feature parameters, such as
I/O addresses and boot devices.
■
Power Management parameters that help to
conserve your notebook’s batteries.
■
System Data Security feature parameters,
such as passwords.
POINT
The BIOS setup utility is entered by
pressing the F2 key during the boot
process while the Fujitsu logo is on
the screen.
IDENTIFYING THE DRIVES
Your notebook uses drive letters (Example A:,
B:, C:, D:, E:) to identify internal and external
devices such as hard drives, floppy disk drives,
CD-ROM drives and PC Cards. The most com-
monly assigned drive designators are listed
below. If you add other devices, the drive
designators may be different. See your operating
system manual for setting drive designations.
Drive Designators
A: Floppy disk drive.
Installed inside your notebook.
B: Not used with your notebook.
C: Hard drive.
Installed inside your notebook.
D: DVD/CD-ROM drive.
Installed inside your notebook.