Filter
Top Products
Section Five
78
Problem Possible Cause Possible Solution
The Built-in Display does not close. 1. A foreign object, such as a paper clip, is stuck 1. Remove all foreign objects from
between the display and the keyboard. the keyboard.
The Built-in Display has bright or dark spots. 1. If the spots are very tiny and few in number, 1. This is normal; do nothing.
this is normal for a large LCD display.
2. If the spots are numerous or large enough to 2. Display may be faulty; contact your
interfere with your operation needs. support representative.
The application display uses only a portion 1. You are running an application that does not 1. Display compression gives a clearer but
of your screen and is surrounded by a dark band. support 800 x 600 pixel resolution display smaller display for applications that do not
and display compression is enabled. support 800 x 600 pixel resolution. You can
fill the screen but have less resolution by
changing your display compression setting,
(See Video Features Submenu of the Advanced
Menu in the BIOS guide. See page 44 for
more information.)
You have connected an external monitor 1. Your BIOS setup is not set to enable your 1. Try toggling the video destination by
and it does not come on. external monitor. pressing Fn and F10 together or check your
BIOS setup and enable your external moni-
tor. (See Video Features Submenu of the
Advanced Menu in the BIOS guide. See page
44 for more information.)
2. Your external monitor is not 2. Reinstall your device.
properly installed. (See External Monitor on page 53.)