Fujitsu C-4120 Laptop User Manual


 
Section Five
82
*Real time clock error Real-time clock fails
BIOS test. May require board repair. Contact
your support representative.
*Shadow RAM Failed at offset: nnnn Shadow
RAM failed at offset nnnn of the 64k block at
which the error was detected. You are risking
data corruption if you continue. Contact your
support representative.
nnnn Shadow RAM Passed Where nnnn is
the amount of shadow RAM in kilobytes
successfully tested.
*System battery is dead – Replace and run
SETUP The BIOS CMOS RAM memory hold
up battery is dead. This is part of your BIOS
and is a board mounted battery which requires
a support representative to change. You can
continue operating but you will have to use
Setup Utility default values or reconfigure your
Setup Utility every time you turn off your
notebook. This battery has an expected life
of 2 to 3 years.
System BIOS shadowed System BIOS copied
to shadow RAM.
*System CMOS checksum bad – run SETUP
BIOS CMOS RAM has been corrupted or
modified incorrectly, perhaps by an application
program that changes data stored in BIOS
memory. Run Setup and reconfigure the system.
*System RAM Failed at offset: nnnn System
memory failed at offset nnnn of in the 64k
block at which the error was detected. This
means that there is a fault in your built-in
memory. If you continue to operate you risk
corrupting your data. Contact your support
representative for repairs.
nnnn System RAM Passed Where nnnn is
the amount of system memory in kilobytes
successfully tested.
*System timer error The timer test failed. The
main clock that operates the computer is faulty.
Requires repair of system board. Contact your
support representative for repairs.
UMB upper limit segment address: nnnn
Displays the address of the upper limit of
Upper Memory Blocks, indicating released
segments of the BIOS memory which may
be reclaimed by a virtual memory manager.
Video BIOS shadowed Video BIOS successfully
copied to shadow RAM.