Fujitsu FI-5530C2 Scanner User Manual


 
126
ATTENTION
This scanner can scan ID cards through the Automatic Document Feeder
with the following precautions.
Place one card at a time into the Auto Document Feeder.
ID card feeding requires the card to be fed through the Auto Document
Feeder in portrait mode as in the following figure.
Smooth cards should be placed face down in the Auto Document Feeder.
The card to be scanned should be within the ISO7810 compliance, type
ID-1.
ISO7810-compliant, Type ID-1 card
Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm
Thickness: 0.03 ± 0.003inch / 0.76 ± 0.08mm
Embossed cards (on which a raised effect is created) cannot be scanned.
Cards that are excessively rigid or less flexible may not feed smoothly
and excessive noise may occur.
Cards should be clean from oil and without labels.
Cards cannot be scanned when the imprinter is installed.
PORTRAIT
LANDSCAPE