Filter
Top Products
78
3.1 Cleaning Materials and Locations requiring
Cleaning
■ Cleaning Materials
For details about the cleaning materials, contact the FUJITSU scanner dealer where you
purchased the scanner.
*1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning
the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe
off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of
the cleaned parts.
■ Locations and Cycle for Cleaning
The following table shows a standard cycle provided as a guide for cleaning each location.
Cleaning Materials Parts Number Remarks
Cleaner F1 PA03950-0352
(*1)
1 bottle
Moisten a cloth with this fluid and wipe the
scanner clean.
Cleaning Wipe PA03950-0419 24 sheets/pack
Pre-moistened with Cleaner F1, Cleaning
Wipes are used instead of moistened cloths.
Lint-free dry cloth - Commercially available one
Part to clean Standard Cleaning Cycle
Pad ASSY Clean these parts after every 5,000 scans.
Pick roller
Feed rollers
Plastic rollers
Eject rollers
Sheet guides
Glass
Ultra sonic sensor
PFU LIMITED