Filter
Top Products
1.5 Image Scanning Application
fi-5530C2 Image Scanner Operator’s Guide 29
BASIC SCANNER OPERATIONS
1
1.5 Image Scanning Application
This section explains about the bundled “ScandAll PRO” image scanning application, which is
used as an example to explain the procedures in this manual.
ScandAll PRO supports both TWAIN and ISIS drivers. By defining scan settings as profiles, you
can customize the settings according to your preference.
When ScandAll PRO is installed, you can also install "ScandAll PRO ScanSnap mode Add-in".
This is an add-in application which provides a different set of driver settings as an alternative to
using ScandAll PRO. TWAIN driver is required to use this application. Using the ScandAll PRO
ScanSnap mode Add-in enables easy scanning with a single button.
Chapter 2 "SCANNING VARIOUS TYPES OF DOCUMENTS" (page 33) explains how to scan
different types of documents by using examples of the TWAIN driver started via ScandAll PRO.
For more details about ScandAll PRO, refer to “ScandAll PRO V2.0 User’s Guide”.
For details about ScandAll PRO ScanSnap mode Add-in, refer to the ScandAll PRO ScanSnap
mode Add-in V1.0 User's Guide.
ATTENTION
You cannot use ScandAll PRO ScanSnap mode Add-in in the following cases:
• When the scanner is connected to fi-5000N
• When the scanner is connected with a SCSI cable