Filter
Top Products
A.4 Commands
Appendix A-79
b. Count: bytes 2 to 4
This scanner does not support this field. If a value other than 0 is specified, this scanner
returns the following error information:
• Status: B’00001’ (CHECK CONDITION)
• Sense key: X’5’ (ILLEGAL REQUEST)
(2) Response
This scanner reports the OBJECT POSITION command as follows:
a. Normal
The GOOD status is returned.
• Status: B’00001’ (GOOD)
• Sense key: X’5’ (NO SENSE)
b. Abnormal
The CHECK CONDITION status is returned and sense data is created.
• Status: B’00001’ (CHECK CONDITION)
• Send key: X’5’ (MEDIUM ERROR)
(The cause of the error is jammed paper, an opened ADF cover, or an empty paper
supply.)