Filter
Top Products
Storage and Installation
4-4
4.3.2 Connections
Connect the cables as follows;
(1) Set the power switch OFF. (see Figure 1.1)
(2) Connect the power cable.
Connect the power cable to the power inlet (see Figure 1.1) on the back of the image
scanner.
Connect the other end of the power cable to a power outlet.
(3) Connect the interface cables
Connect the interface cables to the interface connectors (see Figure 1.1) and fasten the
cables with catches or screws. Connect the other end of each Interface cable to the host
computer.
4.3.3 Mounting the stacker
Hook the pins on the stacker to the claws on the image scanner.
Back of the image
Interf
ace
Terminator
If the image
scanner is at
the terminal
side, connect
the terminator
to the