Filter
Top Products
A.4 Commands
Appendix A-105
(2) Window list data: DATA OUT phase (Initiator to Target)
The window list data parameter specifies the window ID for scanner reading. The scanner supports
the following.
a. Simplex reading specification
Transfer length = 1
Window list data
b. Duplex reading specification
Transfer length = 2
Window list data
If any other combinations are specified, the following errors are returned:
- Status: B'00001' (Check condition)
- Sense key: X'5' (Illegal request)
(3) Operation
When the SCAN command is received, the reading method is defined for the scanner.
Byte 0
Window ID=0
Byte 0
1
Window ID=0
Window ID=128