Filter
Top Products
A.4 Commands
Appendix A-97
c. Mode page
The mode page format is indicated for each page code.
• Page code
The PAGE CODEs supported in this scanner are as follows:
Page code Description
X’00’ Don’t care (IGNORE)
X’01’ Reserved
X’02’ Not supported
X’03’ Not supported
X’04’ to X’3B’ Reserved
X’3C’ Auto size detection
X’3D’ Lamp timer
X’3E’ Job separation sheet
X’3F’ Reserved
Each page is described below.
1) Auto size detection (PAGE CODE X’3C’)
• AWD (Automatic Width Detection): Byte 2
The AWD bit specifies detected paper width replaces width value which has specified
in Width field in Set Window Parameter. When this bit is 0, automatic width detection
is disabled. When this bit is 1, automatic width detection is enabled. After the
scanning, detected width is set in Detected Paper Width field of Pixel Size Data.
The AWD bit is reserved now. If 1 is set to this bit, the scanner returns following error
information.
Status: B’00001’ (CHECK CONDITION)
Sense Key: X’5’(ILLEGAL REQUEST)
Byte 0
1
2
3
4
7
(Reserved)
PAGE CODE (X’3C’)
(Reserved)
7
6
5
4
3
2
1
0
Parameter length (X’06’)
(Reserved)
AWD
ALD
(Reserved)
to