Filter
Top Products
Scanner Interface
Appendix A-92
Note:
If WINDOW ID = 0, pixel size data is calculated for front-side window. If WINDOW ID =
128, pixel size data is caluculated for both front-side and back-side windows.
Example:
For the READ command, CHECK CONDITION is returned with ILI=0.
c. Detected paper information (DATA TYPE CODE = X’81’)
This scanner detects the paper size and the job separation sheet when OBJECT POSITION
(load object) is received.
Read (DATA TYPE CODE = X’81’) command is used to get detected paper information from
this scanner.
Detected paper information shown below:
• Job separation sheet: Byte 2
X’80’: Job separation sheet detected.
X’00’: Job separation sheet not detected.
Length
Width
Image data transfer is
completed at
this line.
Byte 0
1
2
3
4
5
6
7
Reserved
Job separation sheet (See section A.5)
Paper size
Reserved