Filter
Top Products
24 ServerView Event Manager
Viewing alarms
● In the bottom right section of the window you can find out information on the
selected alarm entry in the alarm list via the two or three tabs provided:
– Alarm Details tab - contains a brief description of the selected alarm entry
in the alarm list.
– Alarm Information tab - contains detailed information on the selected
alarm entry as stored in the MIB.
– Server Information tab - provides information on the server from which the
selected alarm entry originates. Under General Information you will see
general information about the server (e.g. system name, IP address,
community name) and under Additional Information you will see additional
information as stored in the Server Properties (e.g. administrator,
location, model).
On this tab you will also find a link, depending on whether the server in
question is entered in the ServerView server list or not.
If the server is in the server list, you can use the Edit Server Settings link
to open the Server Properties window for this server, via which you can
change the configured values for the server.
If the server is not in the ServerView server list, you can use the Add
Server link to start the Server Browser and add the server to the list. For
more information on the Server Properties and the Server Browser, see
the ServerView Operations Manager User Guide.
I The Server Information tab is only available if both the event
manager and the Operations Manager are installed on the
management station.
An executable program was triggered by this alarm.
This alarm was forwarded to the management station.
Table 3: Icons in the Alarm Monitor