Filter
Top Products
76 ServerView Event Manager
Making trap settings
4.10 Making trap settings
If you have selected Station for the forwarding, the New Station Configuration
window opens. In this window you can use the Station Settings and Time Model
Settings tabs to make all necessary settings for trap forwarding.
Station Settings tab
The Station Settings tab offers fields for the trap settings, some of which
already contain predefined settings.
The input fields in the Station Settings window have the following
meanings:
Name Meaning
Station Name Name of the station to which the traps are to be
forwarded.
If you want to modify the trap settings for an existing trap
forwarding (see Edit button, section "Forwarding
alarms" on page 51), this field contains the already
assigned name and is disabled.
Community Name of the community to which the traps are to be
forwarded.
The default value is public.
Time Model Time model indicating when an alarm is to be
forwarded.
Select a predefined time model from the drop-down list.
You can set your own time model via the Time Model
Settings tab.
IP Address Internet protocol address
Table 15: Input fields in the Station Settings window