Filter
Top Products
Components 15
Power supply auxiliary connector (E)
Provides additional connections from the power supply to the system board.
Optional power connector (AW)
This power connector provides an alternative connection for use with a
different power supply. This connector is not used in this system.
Front panel connectors
There are several connectors designed to transfer signals between the front
panel and the system board. Many of these connectors are redundant and
are included to allow the system board to be installed in different chassis.
Some of these connectors are not used.
PS fault reset connector (D)
Allows connection of a reset switch for processor fault conditions. This
switch will not reset the processor or remove the fault condition, it clears
the fault alert flag and causes the fault LED to turn off. If the fault condition
persists, the processor fault LED will turn back on.
Front panel connector (L)
The front panel connector provides the signals for the front panel indicator
LEDs and the front panel buttons. Not used in the system.
Reset connector (K)
The reset connector provides the connection of the reset button from the
front panel.
4081TL.book Page 15 Tuesday, December 22, 1998 1:27 PM