Filter
Top Products
42 Maintaining and Troubleshooting the Gateway ALR 8300 Server
6.
Secure the bracket to the left side of the new drive, using the two
screws you just removed (see Figure 21).
Figure 21: Replacing the 3.5-inch Drive in the Top Drive Bay
7.
Place the new drive and bracket in the top drive bay and secure them
with the four screws you removed earlier.
8.
Connect the data and power cables to the new drive, being careful to
orient them correctly.
9.
Close the case and turn the server on.
4081TL.book Page 42 Tuesday, December 22, 1998 1:27 PM