Filter
Top Products
28 Maintaining and Troubleshooting the Gateway ALR 8300 Server
6.
Place the processor cartridge that you removed in a safe place.
7.
Remove the replacement processor cartridge from its protective
wrapping and place it in the cartridge supports for the slot 1 connector.
See Figure 11.
Figure 11: Installing the Processor Cartridge
8.
Slide the cartridge all of the way down until it seats securely in the
slot 2 supports.
9.
Place the lock bar on the top of the processor cartridge and replace the
two screws that secure it in place.
10.
Set the jumpers properly for the new processor configuration.
11.
Close the case, as described in “Closing the system” on page 7.
12.
Reconnect the power cord and turn on the system.
4081TL.book Page 28 Tuesday, December 22, 1998 1:27 PM