Filter
Top Products
Installing Components 47
6.
Firmly insert the edge of the expansion card into the slot (see
Figure 25).
Figure 25: Adding an Expansion Card
7.
After seating the card firmly, secure it to the chassis by installing the
screw you removed in Step 5 through the mounting bracket at the end
of the card.
8.
Connect cables to the card. (See the card documentation for proper
jumper settings and cable orientation.)
9.
Close the case, as described in “Closing the system” on page 7.
10.
Reconnect the power cord and turn on the system.
4081TL.book Page 47 Tuesday, December 22, 1998 1:27 PM